BAILII is celebrating 24 years of free online access to the law! Would you consider making a contribution?
No donation is too small. If every visitor before 31 December gives just £1, it will have a significant impact on BAILII's ability to continue providing free access to the law.
Thank you very much for your support!
[Home] [Databases] [World Law] [Multidatabase Search] [Help] [Feedback] | ||
England and Wales Court of Appeal (Civil Division) Decisions |
||
You are here: BAILII >> Databases >> England and Wales Court of Appeal (Civil Division) Decisions >> Activa DPS Europe SARL v Pressure Seal Solutions Ltd (t/a Welltec Systems UK) [2012] EWCA Civ 943 (11 July 2012) URL: http://www.bailii.org/ew/cases/EWCA/Civ/2012/943.html Cite as: [2012] EWCA Civ 943, [2012] 3 CMLR 33, [2012] Eu LR 756, [2012] TCLR 7 |
[New search] [Printable RTF version] [Help]
ON APPEAL FROM THE SOUTHAMPTON COUNTY COURT
RECORDER ACTON-DAVIS QC
OS001630
Strand, London, WC2A 2LL |
||
B e f o r e :
LORD JUSTICE PATTEN
and
LORD JUSTICE MCFARLANE
____________________
ACTIVA DPS EUROPE S.A.R.L. (A company incorporated under the Laws of the Republic of France) -and- |
Defendant/Appellant |
|
PRESSURE SEAL SOLUTIONS LIMITED T/A WELLTEC SYSTEM (UK) |
Claimant/ Respondent |
____________________
Mr David Harby (instructed by Paris Smith LLP) for the Respondent
Hearing date : 20th June 2012
____________________
Crown Copyright ©
Lord Justice Patten :
"(15) It should be possible to place apparatus on the market or put it into service only if the manufacturers concerned have established that such apparatus has been designed and manufactured in conformity with the requirements of this Directive. Apparatus placed on the market should bear the 'CE' marking attesting to compliance with this Directive. Although conformity assessment should be the responsibility of the manufacturer, without any need to involve an independent conformity assessment body, manufacturers should be free to use the services of such a body.
(16) The conformity assessment obligation should require the manufacturer to perform an electromagnetic compatibility assessment of apparatus, based on relevant phenomena, in order to determine whether or not it meets the protection requirements under this Directive. "
"1. This Directive regulates the electromagnetic compatibility of equipment. It aims to ensure the functioning of the internal market by requiring equipment to comply with an adequate level of electromagnetic compatibility. This Directive applies to equipment as defined in Article 2.
…..
3. This Directive shall not apply to equipment the inherent nature of the physical characteristics of which is such that:
(a) it is incapable of generating or contributing to electromagnetic emissions which exceed a level allowing radio and telecommunication equipment and other equipment to operate as intended; and
(b) it will operate without unacceptable degradation in the presence of the electromagnetic disturbance normally consequent upon its intended use."
"any finished appliance or combination thereof made commercially available as a single functional unit, intended for the end user and liable to generate electromagnetic disturbance, or the performance of which is liable to be affected by such disturbance;"
"'any electromagnetic phenomenon which may degrade the performance of equipment. An electromagnetic disturbance may be electromagnetic noise, an unwanted signal or a change in the propagation medium itself;"
"take all appropriate measures to ensure that equipment is placed on the market and/or put into service only if it complies with the requirements of this Directive when properly installed, maintained and used for its intended purpose."
"Article 7.
Compliance of apparatus with the essential requirements referred to in Annex I shall be demonstrated by means of the procedure described in Annex II (internal production control). However, at the discretion of the manufacturer or of his authorised representative in the Community, the procedure described in Annex III may also be followed.
Article 8
1. Apparatus whose compliance with this Directive has been established by means of the procedure laid down in Article 7 shall bear the 'CE' marking which attests to that fact. The affixing of the 'CE' marking shall be the responsibility of the manufacturer or his authorised representative in the Community. The 'CE' marking shall be affixed in accordance with Annex V."
"Equipment shall be so designed and manufactured, having regard to the state of the art, as to ensure that:
(a) the electromagnetic disturbance generated does not exceed the level above which radio and telecommunications equipment or other equipment cannot operate as intended;
(b) it has a level of immunity to the electromagnetic disturbance to be expected in its intended use which allows it to operate without unacceptable degradation of its intended use."
"1. The manufacturer shall perform an electromagnetic compatibility assessment of the apparatus, on the basis of the relevant phenomena, with a view to meeting the protection requirements set out in Annex I, point 1. The correct application of all the relevant harmonised standards whose references have been published in the Official Journal of the European Union shall be equivalent to the carrying out of the electromagnetic compatibility assessment.
2. The electromagnetic compatibility assessment shall take into account all normal intended operating conditions. Where the apparatus is capable of taking different configurations, the electromagnetic compatibility assessment shall confirm whether the apparatus meets the protection requirements set out in Annex I, point 1, in all the possible configurations identified by the manufacturer as representative of its intended use.
3. In accordance with the provisions set out in Annex IV, the manufacturer shall draw up technical documentation providing evidence of the conformity of the apparatus with the essential requirements of this Directive.
4. The manufacturer or his authorised representative in the Community shall hold the technical documentation at the disposal of the competent authorities for at least ten years after the date on which such apparatus was last manufactured.
5. The compliance of apparatus with all relevant essential requirements shall be attested by an EC declaration of conformity issued by the manufacturer or his authorised representative in the Community.
6. The manufacturer or his authorised representative in the Community shall hold the EC declaration of conformity at the disposal of the competent authorities for a period of at least ten years after the date on which such apparatus was last manufactured.
7. If neither the manufacturer nor his authorised representative is established within the Community, the obligation to hold the EC declaration of conformity and the technical documentation at the disposal of the competent authorities shall lie with the person who places the apparatus on the Community market."
"take all appropriate measures to withdraw the apparatus from the market, to prohibit its placing on the market or its putting into service, or to restrict the free movement thereof."
"32. The Defendant's argument is that in breach of the implied term (which I have already held applied) the goods were not fit for purpose because they could not lawfully be sold within the EU. The Claimant's response is that the Article creates an obligation on a Member State to prevent sale but does not of itself make re-sale unlawful. Moreover, in fact, the Defendant was able to sell machines outside the EU including Norway and Africa where no such certification is required. In fact, also, the Defendant has sold a number of machines into the EU without difficulty, perhaps with the advantage of the generic Certificates which were the subject of evidence.
33. In my judgment, on the evidence the machines were not unfit for purpose because the Defendant has, as matter of fact, been able to re-sell the majority both within and outside the EU. That may be through the use of generic Certificates, or it may be because no enforcement proceedings have been taken in France or elsewhere within the EU. On the evidence I cannot conclude that the machines the subject of the invoices were unfit for purpose."
"No person shall place on the market apparatus unless either the following requirements, or the corresponding requirements of the EMC Directive as implemented under the law of another state in the Community, are met—
(a) the apparatus is compliant with the essential requirements;
(b) compliance with the essential requirements has been demonstrated in accordance with regulation 18;
(c) the technical documentation including any statement issued by a notified body under regulation 20 has been prepared and is available to the enforcement authority on request;
(d) the CE marking has been properly affixed by the manufacturer or his authorised representative in accordance with regulation 21;
(e) an EC declaration of conformity has been issued in accordance with the requirements of regulation 22;
(f) each apparatus is identified in terms of type, batch, serial number or any information allowing for identification of the apparatus;
(g) each apparatus is accompanied by the name and address of the manufacturer and if he is not established in the Community, the name and address of the responsible person;
(h) the manufacturer has provided information on any specific precautions that must be taken when the apparatus is assembled, installed, maintained or used in order to ensure that when put into service the apparatus complies with the essential requirements;
(i) apparatus for which compliance with the essential requirements is not ensured in residential areas is accompanied by a clear indication of this restriction of use and where appropriate this indication is also on the packaging; and
(j) the information required to enable the apparatus to be used in accordance with its intended purpose is contained in the instructions accompanying the apparatus."
"An EC declaration of conformity shall be regarded as properly issued in relation to apparatus if the following requirements are complied with—
(a) the apparatus is compliant with the essential requirements;
(b) the declaration is issued by the manufacturer or his authorised representative and contains the following—
(i) a reference to the EMC Directive;
(ii) an identification of the apparatus to which it refers;
(iii) the name and address of the manufacturer and where applicable, the name and address of his authorised representative;
(iv) a dated reference to the specifications under which conformity is declared to ensure the conformity of the apparatus with the provisions of the EMC Directive;
(v) the date of that declaration; and
(vi) the identity and signature of the person empowered to bind the manufacturer or his authorised representative."
"That case, I think, authorises four propositions: first, that, where a contract is ex facie illegal, the court will not enforce it. whether the illegality is pleaded or not; secondly, that where, as here, the contract is not ex facie illegal, evidence of extraneous circumstances tending to show that it has an illegal object should not be admitted unless the circumstances relied on are pleaded; thirdly, that, where unpleaded facts. which taken by themselves show an illegal object, have been revealed in evidence (because, perhaps, no objection was raised or because they were adduced for some other purpose), the court should not act on them unless it is satisfied that the whole of the relevant circumstances are before it; but, fourthly, that where the court is satisfied that all the relevant facts are before it and it can see clearly from them that the contract had an illegal object, it may not enforce the contract, whether the facts were pleaded or not."
"Civil trials are conducted on the basis that the court decides the factual and legal issues which the parties bring before the court. Normally each party should bring before the court the whole relevant case that he wishes to advance. He may choose to confine his claim or defence to some only of the theoretical ways in which the case might be put. If he does so, the court will decide the issues which are raised and normally will not decide issues which are not raised. Normally a party cannot raise in subsequent proceedings claims or issues which could and should have been raised in the first proceedings. Equally, a party cannot, in my judgment, normally seek to appeal a trial judge's decision on the basis that a claim, which could have been brought before the trial judge, but was not, would have succeeded if it had been so brought. The justice of this as a general principle is, in my view, obvious. It is not merely a matter of efficiency, expediency and cost, but of substantial justice. Parties to litigation are entitled to know where they stand. The parties are entitled, and the court requires, to know what the issues are. Upon this depends a variety of decisions, including, by the parties, what evidence to call, how much effort and money it is appropriate to invest in the case, and generally how to conduct the case; and, by the court, what case management and administrative decisions and directions to make and give, and the substantive decisions in the case itself. Litigation should be resolved once and for all, and it is not, generally speaking, just if a party who successfully contested a case advanced on one basis should be expected to face on appeal, not a challenge to the original decision, but a new case advanced on a different basis. There may be exceptional cases in which the court would not apply the general principle which I have expressed. But in my view this is not such a case."
"The circumstances here were that the only remedy in law which the plaintiff initially had in respect of this breach of contract was a right of action in damages. If it be said that an alternative remedy was offered to him by the defendants by way of selling the house back to them I would say that equally in this case the plaintiff was not bound to choose between the two remedies. It seems to me that if counsel for the defendants' contentions were right in this case it would logically follow that if the offer that had been made by the defendants had been not 'We will take the house back' but 'We will pay you £1,900 damages' and the plaintiff had then, for some reason, refused that offer and had then brought an action for damages it could be said that he ought to have accepted the offer and thereby mitigated his damages and therefore he was entitled to nothing at all. That cannot be. Clearly what would happen in those circumstances would be that the defendants, if they were wise, would made a payment into court of the £1,900 and the plaintiff would suffer in respect of costs. But it could not possibly be suggested that the refusal to accept the offer, even if such refusal were wholly capricious, was something that deprived the plaintiff of his right to substantial damages altogether."
Lord Justice McFarlane :
The Chancellor :