BAILII is celebrating 24 years of free online access to the law! Would you consider making a contribution?
No donation is too small. If every visitor before 31 December gives just £1, it will have a significant impact on BAILII's ability to continue providing free access to the law.
Thank you very much for your support!
[Home] [Databases] [World Law] [Multidatabase Search] [Help] [Feedback] | ||
United Kingdom Statutory Instruments |
||
You are here: BAILII >> Databases >> United Kingdom Statutory Instruments >> The Motor Vehicles (Designation of Approval Marks) (Amendment) Regulations 1981 No. 126 URL: http://www.bailii.org/uk/legis/num_reg/1981/uksi_1981126_en.html |
[New search] [Help]
Statutory Instruments
MERCHANDISE MARKS
Made
3rd February 1981
Laid before Parliament
12th February 1981
Coming into Operation
5th March 1981
The Minister of Transport in exercise of the powers conferred by section 63(1) of the Road Traffic Act 1972(1) and now vested in him(2), and of all other enabling powers, and after consultation with representative organisations in accordance with the provisions of section 199(2) of that Act, hereby makes the following Regulations:-
1. These Regulations shall come into operation on 5th March 1981 and may be cited as the Motor Vehicles (Designation of Approval Marks) (Amendment) Regulations 1981.
2. The Motor Vehicles (Designation of Approval Marks) Regulations 1979(3) shall be amended so as to have effect in accordance with the following provisions of these Regulations.
3. In Schedule 2-
(a)after item No. 24 insert the following new item-
"24A | Motor vehicle approved in respect of the emission of pollutants by a diesel engine. | The vehicle | 24 (amendment, 11th February 1980) | 1, 2 and 16"; |
(b)after item 43C add the following new item:-
"44 | Child restraint. | The child restraint | 44 1st September 1980 | 1, 2 and 17". |
4. In Schedule 3, after paragraph 15, add the following new paragraphs:-
"16. The figure in the rectangle above the circle in the marking relating to item No. 24A in Schedule 2 (which indicates the corrected absorption coefficient of the vehicle part to which that marking relates) will be varied in accordance with the requirements of the ECE Regulation specified in column (5) of Schedule 2 in relation to that marking.
17. In relation to the marking prescribed at item No. 44 in Schedule 2-
(1) the approval number and any additional symbol outside the marking in relation to this item must be placed close to the circle, and either above or below the "E" or to the left or right of it, the digits of the approval number must be on the same side of the "E" and oriented in the same direction, and any additional symbol must be diametrically opposite the approval number;
(2) the word "universal" shall form part of the marking if the child restraint is manufactured for use in all types of vehicle, but the word "non-universal" shall form part of the marking instead of the word "universal" if the child restraint is not manufactured for use in all types of vehicle; and
(3) the figures "9-�36" following the word "universal" or, as the case may be, "non-universal" shall be varied so as to show the weight group for which the child restraint is manufactured being either:-
9-�18 kilograms,
15-�25 kilograms,
22-�36 kilograms,
9-�25 kilograms, or
15-�36 kilograms.".
Norman Fowler
Minister of Transport
3rd February 1981
(This Note is not part of the Regulations.)
These Regulations further amend the Motor Vehicles (Designation of Approval Marks) Regulations 1979 as follows:-
(a)in consequence of ECE Regulation 24 (uniform provisions concerning the approval of vehicles equipped with diesel engines with regard to the emission of pollutants by the engine) being amended by the O2 series of amendments, a new marking is designated as an approval mark and numbered 24A in Schedule 2 to these Regulations;
(b)in consequence of ECE Regulation 44 (uniform provisions concerning the approval of restraining devices for child-occupants of power-driven vehicles), a new marking is designated as an approval mark and numbered 44 in Schedule 2 to these Regulations; and
(c)new paragraphs are added to Schedule 3 to these Regulations: paragraph 16 provides for variation in the figures in the rectangle above the circle in the marking prescribed as an approval mark at item No. 24A: paragraph 17 provides for certain circumstances relating to variations in the marking prescribed as an approval mark at item No. 44.
section 63(1) was amended by the Designation of Approval Marks (European Communities) Regulations 1973 (S.I. 1973/1193).
S.I. 1979/571.
as amended by S.I. 1980/582 and 1980/2027.