BAILII is celebrating 24 years of free online access to the law! Would you consider making a contribution?
No donation is too small. If every visitor before 31 December gives just £1, it will have a significant impact on BAILII's ability to continue providing free access to the law.
Thank you very much for your support!
 |
[Home] [Databases] [World Law] [Multidatabase Search] [Help] [Feedback] | |
United Kingdom Statutory Instruments |
||
|
You are here: BAILII >> Databases >> United Kingdom Statutory Instruments >> The Climate Change Agreements (Eligible Facilities) (Amendment) Regulations 2009 No. 2458 URL: http://www.bailii.org/uk/legis/num_reg/2009/uksi_20092458_en_1.html |
||
[New search] [Help]
Made
6th September 2009
Laid before the House of Commons
9th September 2009
Coming into force
1st October 2009
The Secretary of State makes the following Regulations in exercise of the powers conferred by paragraphs 50(3), 50(4) and 146(7) of Schedule 6 to the Finance Act 2000(1).
1. These Regulations may be cited as the Climate Change Agreements (Eligible Facilities) (Amendment) Regulations 2009 and shall come into force on 1st October 2009.
2. The following paragraphs are added to the Schedule to the Climate Change Agreements (Eligible Facilities) Regulations 2006(2), after paragraph 12 of that Schedule–
"13. At an installation or site where plastic materials, or plastic products (whether or not these are finished products), are produced by–
(a) the application of heat and pressure to; or
(b) a chemical reaction involving,
plastics powder, granules, shredded waste or liquid: injection moulding, reaction injection moulding, compression moulding (including hot and cold press moulding), transfer moulding, structural foam moulding, direct screw transfer moulding, rotational moulding (including slush moulding), flexible foam moulding (including dual component processing), blow moulding, casting, expanded polystyrene moulding, expandable materials processing, mixing and compounding, calendering, powder coating (including dip moulding), sintering, thermoforming (including vacuum forming), pultrusion, filament winding, spread coating, hand lay-up and resin transfer moulding.
14. At an installation or site where refined salt for use in food products or supplements is prepared or processed from minerals.
15. At an installation or site, not being a launderette predominately offering self-service washes or predominately serving the domestic market, where textiles are laundered by washing with water, drying and smoothing save where such laundering is carried out in support of other activities carried out by the business (not being textile rental activities), whether or not such activities are carried out at the installation or site.".
Joan Ruddock
Minister of State
Department of Energy and Climate Change
6th September 2009
(This note is not part of the Regulations)
These Regulations amend the Climate Change Agreements (Eligible Facilities) Regulations 2006 by adding three paragraphs to the Schedule to those Regulations. These paragraphs add three new descriptions of relevant processes and activities carried out at an installation or a site upon which there is an installation which are relevant for the purposes of determining whether such an installation is taken to be a facility that is eligible for inclusion in a climate change agreement.
A full impact assessment has not been produced for this instrument as no significant impact on the private or voluntary sectors is foreseen.
